2.5M Shoe Sole Cleaning Machine for Pharmaceutical Companies
1. The staff put on flat-bottom dust-free shoes (anti-static shoes) and stepped on the cleaning area.Then step on the strong absorbent cotton, blot the water stains left by the soles, and finally enter the air shower or workshop.
2. Cleaning soles and blotting water in one go, cutting off the important dust pollution source in the dust-free workshop and improving the cleanliness of the entire workshop.
3. Jiebang automatic sole cleaning machine can be placed at the entrance of the workshop,the workshop staff only needs to wear work shoes and step into the cleaning area as usual.
4. The sensor automatically senses the human body and starts the machine, scrubbing the soles, such as dust, mud, etc.And cleaning time is about 3 to 5 seconds.Then step on the water absorption zone of the machine to strongly damp the water stains that may remain on the sole during the cleaning process.
Drying area:Absorbent cotton with special material can absorb residual moisture in the sole in 1.0 second.The entire process can be completed in 15 seconds. The cleaning time of the machine can be adjusted.
Effect: Reduce the dirt, shoe prints, etc. left by the soles .Wash the soles and absorb residual moisture.
1. The machine can wireless communicate with mobile devices (mobile phones, etc.), and connect the machine through the wireless device to set various parameters . (network version WIFI/single version optional)
2. It is very convenient to replace the brush without on the machine disassembly the sole cleaning machine.
3. Automatic induction control. When the personnel are close, the equipment automatically starts working and leaves the automatic stop work, which can effectively save energy, reduce mechanical loss, prolong service life, eliminate the need for special care, and reduce management costs.
4. There is no water splashing and 100% comprehensive cleaning during the machine working. People do not need to stay during the cleaning, and machine will stop when people leave .
5. The whole machine is fully intelligent with water, automatic water change, automatic drainage, and washing along with draining.
6. When the machine is in standby and running, the height position of the water level is monitored in real time to ensure the safe use of the machine.
1. How is the payment method?
A : Give priority to TT/LC payment or the following two methods
a. After the contract is signed, pay 30% deposit first, the production is completed, notify the payment, pay the balance, and then ship the original bill of lading. Commercial invoice Packing list Customs clearance information and other complete documents
b.After receiving the deposit, arrange the production and delivery, after the customer receives the copy of the bill of lading, pay the balance, receive the balance, and send the full set of documents.
2. How to pack?
A : Package is a wooden box tailored to the product. If you need other packaging, you can communicate with customer service, and the additional cost will be calculated.
3. Is there a product certification?
A : Our company will provide CE, ISO, THUVROS and other certifications required by customers.
4. What are the advantages of your products?
A : Can be spliced, thin, intelligent, networked, without water tank, drain directly to the sewer huio etc.
5. Can I make a trademark brand or outer packaging specified by the customer?
A : In the case of a small number of customers, we do not accept to help customers to specify the brand, as the case may be.
6. Can I make a trademark brand or outer packaging specified by the customer?
A:In the case of a small number of customers, we do not accept to help customers to specify the brand, as the case may be.
|Power supply||AC220/110V(option) 50/60HZ (standard 24V dedicated power supply)|
|Width indicator lamps||LED blue light (default), violet light (with UV disinfection function , optional)|
|Drainage method||Direct drainage|
|Material||Aluminum alloy , plastic , 304 stainless steel|
|Panel color||Default black, other colors can be customized|
|Pipeline interface location||Optional left and right|
|Size:||Width:76cm , height: 8.5cm on both sides , cleaning area height: 2cm , water absorption area length: 57.6cm , cleaning length can be customized.|
Working life: 7 years at least.
The high-tech sole cleaning machine manufactured by Jiebang Electric is the simplest way to clean your shoe sole with water to solve the problems of sole cleaning.
HARDWORK sole cleaning machine is fully intelligent with automatic water change , automatic sewage discharge, and accompanying washing . It is the most convenient, reliable and eco-friendly way to remove dust and dirt particles from soles before it enters a clean area.One time investment, long-time benefit. It also can reduce the cost of the production. It can be installed on different entrance of the workshop, block the dust out of the workshop, and protect the environment.
HARDWORD soles cleaning machine can provide soles cleaning solution for laboratories, operating rooms, pharmaceutical factories, food factories, air shower rooms, dust-free workshops .
Intelligent work, automatic sensors, save the energy , reduce the cost.
1.When a person pass through the machine , the brush rotates, and the adjacent two brushes rotate in opposite directions ; The foot is stepped on the brush pedal to achieve the purpose of cleaning the sole . Automatically changing water and automatically discharging dirt .
2.The cleaned shoes can be sucked dry when they are placed on a high-performance absorbent sponge.
1.There is no water splashing and 100% comprehensive cleaning during the machine working . People do not need to stay during the cleaning , and machine will stop when people leave .
2.The whole machine is fully intelligent with water , automatic water change , automatic drainage , and washing along with draining .
3.When the machine is in standby and running , the height position of the water level is monitored in real time to ensure the safe use of the machine .
4. A wireless network is installed in the machine and our company will supervise the operation of the machine in real time . (Network model of WIFI/4G option)
5.Disinfectant is automatically added in the suction area , for the environment to be sterilized . (Option)
6.For the environment to be disinfected , the width indicator lamps on both sides of the sole cleaning machine is ultraviolet light , with the cleaning area and the suction area are irradiated for a long time . (Option)
7.The total width of the sole cleaning machine is 76cm , the width of the effective cleaning area is 43cm. The cleaning length is assembled according to the customer's requirements , and multiply by 6cm . (Option)
8.The machine is installed with a 3.5 inch touch screen , easy to set the machine parameters . (Network model of WIFI/4G option)
9.Import and export indicator lamps are installed in the four corners of the machine . The lamps are interval blinking when in standby mode . They are always on when in running mode and warning pedestrians when in dark conditions .
10.Width indicator lamps are installed on both sides of the machine ( Default luminous blue ) . They are breathing blinking when in standby mode and always on when in running mode. It blinking quickly when machine in fault and warning pedestrians when in dark conditions .
11.Adjustable for each wash time . (Option)
12. The machine is installed a sensor to monitor the operation of the drive structure.
13. The suction area is installed a sensor to ensure the absorbent performance is stable.
14.Monitoring the operation of the sewage pump in real time , to ensure the safe.
15.The machine can start and clean automatically when nobody use it.
16.The machine is equipped with an ambient temperature sensor to ensure that the machine works properly .
17.The machine can wireless communicate with mobile devices (mobile phones, etc.) , and connect the machine through the wireless device to set various parameters . (network version WIFI/single version optional)
Conditions of Use
1.Ambient temperature: 0-40°C .
2.Supply water temperature: 0-30°C .
3.Water pressure :2-6KG/CM² .
4.The floor must be horizontal and sturdy when installed, besides ,there is no pit ,no tilt .The bottom of the machine must be completely in contact with the ground , no gap.
5.It is strictly forbidden to move and lift the machine before draining the water inside the cleaning machine.
6. When in installation, the whole machine should be balanced force during the lifting, and no press can be applied to the surface of the machine during the lifting.
Packing: wood case
Contact person: Helen Won
Email: email@example.com / firstname.lastname@example.org